Don’t Cut off Your Fingers
Business Articles | March 11,Retro 8 Phoenix Suns, 2008
Every year, there are hundreds of accidents
involving guillotine paper cutters across the United States. Children,Jordan Retro 8,
parent volunteers, teachers and office workers are all at risk of
hurting themselves using unsafe guillotine style paper cutters,Jordan 8 Phoenix Suns.This article will identify three safety
features that are absolutely essential for safety when using a
guillotine style paper cutter.
Every year,http://www.retro8phoenixsuns2013.org/, there are hundreds of accidents
involving guillotine paper cutters across the United States,Jordan 8s. Children,
parent volunteers, teachers and office workers are all at risk of
hurting themselves using unsafe guillotine style paper cutters. The
razor sharp blades used on these cutters along with the sheer force
that they can exert makes it far too easy to cut oneself or worse cut
off a finger. This article will identify three safety features that are
absolutely essential for safety when using a guillotine style paper
cutter,and usually. Here they are,Do you submit articles to e-zine sites… 1. The Blade Guard – This is the most
important safety feature included on most guillotine cutters. However,
the first thing that many users do when they receive their guillotine
cutter is to remove the guard. I am sure that you have heard people say
that the guard gets in the way or is hard to work around. However,
without the blade guard there is nothing to keep your fingers or
someone else’s fingers from getting under the blade when you are
cutting. Many guillotine cutters simply have a metal bar about ½” from
the blade. However, the best cutters will have a plastic blade guard
that will make it impossible to get your fingers under the blade from
either side of the cutter.
2. The Blade Latch – When you buy a guillotine paper cutter you will
notice that there is a small latch on the front of the machine that
will lock the bade in the closed position. Often this is a small piece
of wire that hooks over the handle of the blade. Other times it is a
metal piece that will connect with the bottom of the handle. This latch
makes sure that the sharp blade is not left exposed when the cutter is
not in use. If the latch is not engaged then it is possible for the
handle to be left in the up position. If a person were to come by and
run their hand along the blade (just to see how sharp it is) or were to
grab the blade with their hand, they could be cut very badly.
3,or are you doing it to avoid somethingelse. The Tension Spring – Every guillotine style paper cutter should have
a tension spring attached to the back of the blade. The spring is
designed to prevent the blade from falling when you let go of the
handle. Without the tension spring your guillotine cutter would operate
just like a guillotine and the blade would quickly fall if you were to
let go of the handle. As you can imagine, this could present a huge
safety risk. The tension spring should never be removed from a paper
cutter and if it becomes damaged the cutter should be put away and not
used until it has been replaced.
Unfortunately, many users do not exercise common sense when using their
guillotine cutting machines. Even with these three safety features in
place, a guillotine cutter can still be very dangerous. It is always
important to be careful when using your paper cutter and to remember
that the blade is very sharp. If you haven’t yet bought a paper cutter
or are considering buying a guillotine cutter you absolutely need to
make sure the one you choose has these three features .